The number of POD-systems and sub-mods is growing exponentially, and it is difficult to find a manufacturer that has not started to produce devices of such format. But at the same time many vapers, especially old-school ones, categorically do not want to switch to a new format, preferring old-school tanks and drips. The reason for this decision is very simple: traditional tanks allow to get a really rich taste that is quite problematic to get in exchangeable vaporizers. Especially for such vapers all known company Vandy Vape together with German brand German Stil Vapor released quite an interesting and original atomizer ProjeGt X RDTA. Although it does not use the newest ideas, but Vandy Vape GSV ProjeGt X RDTA will be a real find for vapers who appreciate the taste, versatility and serviceability.
General Info
Vandy Vape GSV ProjeGt X RDTA is a rather small atomizer, equipped with cables for liquid supply, designed for one helix and with two draw options – MTL and RDL. The tank is made in both strict and original style, although the common style with the notorious Berserker is clearly visible, but additional rings with notches for adjustment were added to the design. The tank is designed for installation of one coil, and the absorbent cotton in it is in contact with two metal cables lowered into the tank with liquid, so you can get a constant wetting it. It is interesting that the developers have provided two draw options – RDL and MTL, and to switch between modes you just turn the blowing ring. The Vandy Vape GSV ProjeGt X RDTA is available in two colors – black and steel.
Equipment
Given the fact that the main manufacturer of the device is Vandy Vape, it is packed very decently, so in the box the vaper will be able to find:
– ProjeGt X RDTA atomizer;
– Replacement glass;
– Four metal cables (two installed);
– Two pre-wound Superfine Fused Clapton Coil 0.74 Ohm;
– Hexagon;
– Replacement screws;
– Replacement fingerings;
– User’s Manual.
Appearance and Design
In the last couple of years most vape devices in Australia manufacturers focused their attention on the release of POD-systems and sub-mods, practically stopping the development and production of traditional tanks. And it’s for good reason. Quite a lot of vapers are just forced to buy POD systems, as there are no new interesting tanks and, all the more so, drips that can replace the devices bought three to five years ago. The company Vandy Vape in a quite unexpected collaboration with the German manufacturer German Stil Vapor (in Russia it is practically unknown, since it mainly works for the European market) decided to release a new Vandy Vape GSV ProjeGt X RDTA bacodripku. Naturally, the dexterous eye vaper recognizes in a new device modified Vandy Vape Mato RDTA, but the fact remains – the tank is a new one. It is worth saying that at the moment this device is not officially presented for the world market, although information about it is already available. Perhaps it will be sold only in European countries, but it all depends on how much it will please the users.
It is enough to look at Vandy Vape GSV ProjeGt X RDTA and it becomes clear at once who was involved in the design of this tank, because it is very similar to the well known Berserker series. The device is made very accurately and stylish, and even to some extent strict – clear straight lines and a minimum of decor (three ribbed rings are made not for decoration, but for the convenience of disassembly of the device). The manufacturer offers only two colors of the tank – black and steel, but they will be quite enough for most vapers. The seating diameter is 24 mm, so it will perfectly become on almost any box mod.
Vandy Vape GSV ProjeGt X RDTA is crowned by a rather original 510-type drip tip, which you can easily replace with any other from your collection. The tank volume in this model is constant – 4 ml, but considering the fact that the tank is positioned as MTL, this is not a bad indicator.
Base, blowing and usage features
The developers of Vandy Vape and German Stil Vapor decided to use the proven construction of the deck. Therefore, it is designed to install one coil, and it does not matter in what direction it is wound. The helix is secured horizontally with hexagonal screws. For laying the wool there are shallow wells, but do not forget that its ends are in contact with the two steel cables lowered into the tank, so that the “starvation” of the tank will not be observed. The Vandy Vape GSV ProjeGt X RDTA features two draw modes – MTL and RDL. In order to set one or the other mode, you just need to turn the ring at the top of the tank, which opens the corresponding holes – for MTL two holes of 1.0 mm and one 1.2 mm, and for RDL one hole 4.0*2.0 mm and 4.5*2.5 mm. The sub-type design implies bottom blowing, thanks to which a good taste is guaranteed for the vaper.
To fill the tank, simply unscrew the top dome and pour 4 ml of liquid into the hole equipped with a check valve.
Conclusions and impressions
Vandy Vape GSV ProjeGt X RDTA is a controversial experience, as on the one hand it is a slightly reworked Mato RDTA and on the other hand it is an original and versatile tank. Either way, the vaper gets a tasty tank that can be used for both tight and loose puffs, while being easy enough to operate and maintain.
Advantages and disadvantages
Disadvantages
– No possibility of increasing the volume of the tank;
– In order to avoid “starvation” of absorbent cotton, it must be properly laid.
Advantages
– Stylish concise design;
– Good equipment;
– Convenient installation of the coil;
– Constant saturation of the absorbent cotton by cables;
– 510-th drip-tip;
– Variability of blow;
– Easy refilling;
– Good flavor transfer.
