30 November 2024
VOOPOO DRAG Baby Trio Starter Kit 1500mAh

Review of VOOPOO DRAG Baby Trio Starter Kit 1500mAh

Today I’m going to tell you about a very interesting device from VOOPOO. It is compact, has a very cool design, the device runs on a built-in battery and is best suited for vaping liquids with salt nicotine. And I almost forgot, it comes with a chain to wear the device around your neck! Meet the VOOPOO DRAG Baby Trio Starter Kit.

General information and design

The device is extremely compact and can be fully called a stealth kit. If you take it in the palm of your hand, there is only the edge of the diptyp sticking out. So if you want a compact and powerful device this is definitely your choice.

The design is fully consistent with the DRAG line of devices whose distinctive feature is a rubberized colorful insert on the body and as usual, the number of color solutions deserves respect. The number of controls is minimal, only the Fire button, under which is a connector for charging and LED battery level indicator.

canadian vape shop mississauga

Just in the connector part of the device is a hole for the chain, which, incidentally, is only available in the richest package device called FANS Edition, in the standard set of the chain is missing, but personally I would not use it anyway, as for me, much nicer and more practical to use a regular cord.

The design of the atomizer in my opinion does not fit well with the design of the mod, in my opinion it could be worked on a little more. In my opinion the ideal solution was to make the color of the case to match the color of the boxmod, more matte, and driptip in the color of the rubber insert on the body of the mod.

The package

Standard Edition

1 x DRAG Baby Kit

1 x PnP-M2(0.6ohm) vaporizer

1 x PnP-C1(1.2ohm) vaporizer

1 x Glass (1.8ml)

1 x USB cable

1 x Warranty card

1 x User Manual

Fans Edition

+ neck strap

More than worthy package for a set like this. It has both a subom vaporizer for free sipping and a vaporizer for very tight sipping, and that’s about all you need.

Specifications

DRAG Baby Trio mod

Size: 58.5 x 35 x 21.5 mm

Power: Built-in rechargeable battery of 1500mAh

Power Range: 5-25W

Supported Atomizer Resistance: 0.5-3.0ohm

Charging current: 5V/1A

Connector: 510  

The power of the box mod, to put it mildly, is weak, if you compare it to similar devices with built-in batteries. But its main task is exactly to hang inconspicuously on your neck, not to get in the way there and provide you with nicotine during the whole working day. And it can cope with this task without any problems because the built-in battery is enough for about 500 puffs, and considering that we are talking about salt nicotine which gets you high in 10 puffs, the battery charge is more than enough for the whole day.

Well, if you somehow manage to discharge the device during the day, it will be possible to fully charge it in an hour and a half, thanks to the 1A charger. The LED indicator above the UBS connector will indicate the level of charge of the battery. To be honest, I was wondering how VOOPOO managed to provide such a good battery life in such a compact package. They managed to achieve all this due to the compact, energy efficient, and in general the legendary GENE Chip Card, which on top of everything else can boast an excellent response time.

 DRAG Baby Trio tank

Size: 18.5 x 43 mm

Tank Capacity: 1.8ml

Vaporizers:PnP-M2(0.6ohm)/ PnP-C1(1.2ohm)

Connector: 510

Atomizer is tiny, especially compared to the mastodons of the market, but its mission is to satisfy your nicotine addiction and make it as tasty as possible. And it copes with this almost flawlessly. The atomizer works with interchangeable PnP vaporizers, the arsenal of which can’t boast with a huge choice, but they are quite good at transferring flavor and even give out quite a lot of vapor, considering the maximum power of the mod. The 0.6 ohm vaporizer is more suitable for free draft, while 0.8 and 1.2 ohm vaporizers are more suitable for MTL draft.

PnP-C1 1.2 “Omega;: ceramic 1.2ohm coil (for salt nicotine “le; 20mg) (10-15W)

PnP-M2 0.6 “Omega;: on grid 0.6ohm coil for (for regular nicotine “le;12mg) (20-28W)

PnP-R1 0.8 “Omega;: regular 0.8ohm coil (for salt nicotine “le; 20 mg) (12-18W)

Personally, I would use this device on vaporizers with mesh and 12mg salt liquid.

By the way, blowing is present in both MTL and DTL versions and can be adjusted by turning the adjustment ring.

Filling is top and not completely convenient. Only very thin spouts will fit here, but pipettes are questionable, so your 100% choice is the gorilla.

Conclusions and Impressions

This kit was not created for blowing huge clouds and huge fluid consumption, it was primarily created for your convenience, to always have it on hand (read as hanging around your neck) and it just does a great job with that. The total weight of the set is 200 grams, so it can easily hang around your neck all day and you won’t even feel it. The responsive and energy efficient chip together with the high battery capacity will allow you to not worry too much about battery life problems, and if they do come, the charging time is not that great.

Advantages and disadvantages

Disadvantages

Atomizer design

Advantages

High autonomy

Fast charging

Compact size

The ability to hang the device on the chain / lanyard

Crazy DRAG-style design

DTL and MTL blowback