No one will argue that most current vapers are former smokers who switched to the light side. But at the same time, the habit of inhaling several times and the desire to get a TH combined with a tight puff remains. Therefore, it is quite logical that the popularity of MTL atomizers has remained unchanged for several years. Not so long time ago vapers could choose cigarettes from rather poor assortment, but nowadays the choice of such atomizers and tanks and drip pots is big enough, and many manufacturers try to present something new and original. Augvape company does not lag behind its competitors, it recently presented its new MTL-tank Merlin Nano, which will definitely interest many vapers. According to some vapers with experience this tank is a step into 2016, as many of the technical solutions that have been implemented in this atomizer are far from being a novelty. But in any case, Merlin Nano MTL is quite an interesting tank, capable of giving vapers not only a tight puff, but also an excellent flavor transfer.
General Information
Merlin Nano MTL by Augvape is an interesting atomizer designed for using one coil and designed for a tight cigarette puff, implemented by interchangeable jitters and adjustable bottom air blow. The tank is made in rather non-standard 18 mm design, but this allows you to reduce the evaporation chamber to get a decent taste. online vape shop australia Using the traditional base for one coil allows you to pay special attention to the flavor transfer, and the ability to independently replace the jigglers for blowing allows you to choose the best option depending on vaper preferences. The air intake is realized a little bit non-standard, it is carried out through the slot between the top and bottom of the tank. The manufacturer offers this tank in only two colors black and steel, but this is unlikely to upset vapers, as the colors are universal.
Equipment
It is worth paying tribute to the developers of Augvape, who decided to complete this tank to the full program, so the vaper will not have difficulty finding accessories or replacement parts. In the black cardboard box, the vaper will find:
Merlin Nano Tank atomizer;
A 22mm Beauty Ring;
Spare 3.5 ml bubble glass;
Screwdriver;
Three nozzles with 1/2*1/1,2mm diameter holes;
Pre-wound nichrome coil 0,6 Ohm;
Prewound coil of 1 Ohm kantal;
Replacement screws;
Replacement fingerings;
User’s Manual.
Appearance and Design
Many vapers, after looking at the Merlin Nano MTL by Augvape, will say that its design is faintly similar to the atomizers produced nowadays. And it’s hard to argue with him, as the tank is made very old-school, but it gives the device some charm.
It’s worth saying that the Merlin Nano MTL by Augvape is a very small atomizer, both in height and diameter. The decision to release it in a diameter of 18 mm is explained by the manufacturer very simply the tank is designed for stealth devices, on which it will look quite logical. The developers have not forgotten the complete beuty ring for 22 mm, which will allow the tank to look on many box mods more harmoniously.
In order for the vaper to get more autonomy, the manufacturer offers two options for the glass volume of 2 and 3.5 ml. And with the bubble-glass at 3.5 ml the tank looks a bit strange and a bit futuristic, but Augvape made exactly that decision. The Merlin Nano drip tip is a standard 510, so it’s not hard to replace it with any other from your collection.
Base, blowing and usage features
Like most cigarettes, the Merlin Nano MTL by Augvape has a base with two legs for the horizontal positioning of the coil. The legs are secured with two cross-head screws, and the coil installation process is unchallenging.
The wool packing deserves special attention. There is no stops for the cotton ends, so the cotton ends are long enough. On the one hand this is good and convenient, but on the other hand you need to learn how to stack absorbent cotton so that no corks or overflow.
An interesting technical solution is the use of a quite non-standard evaporation chamber made of heat resistant plastic. Whether this solution is justified or not is not clear yet, but maybe it will slightly blur the taste.
Taking into account that Merlin Nano MTL by Augvape is classic cigarette, it uses interchangeable jets with holes of different diameters. The vaper chooses which of them to install on the 1/2*1/2 mm hole located in the center, and the jets are fastened in the hole with a small protrusion with an oring.
Rather interestingly realized blowing. Air intake is made not through special holes, but through a gap between the top and bottom of the tank.
A small and not the most pleasant surprise the vaper will get when refilling. It is 100% old-school-bottom, and the very process of refilling will remind refilling of the good old Subtank, and not everyone will like it.
Conclusions and impressions
Merlin Nano MTL by Augvape raises both a lot of questions and a lot of pleasant moments at the same time. Not quite clear design and a little strange construction, but pleases the taste and ease of maintenance. It is safe to say that many vapers who have recently started vaping will not like everything, but fans of flavorful vapor with experience will appreciate this atomizer.
Advantages and disadvantages
Disadvantages
Inconvenient refilling;
After refilling it is necessary to re-adjust the blowing;
High shaft will blur the flavor.
Advantages
Original design;
Small size;
Rich equipment;
Ability to use 3.5 ml glass;
The presence of the Beauty Ring;
Interchangeable jets;
Non-standard evaporation chamber;
Good taste.
