Recently, there has been a rather interesting trend, more and more vapers are moving away from large massive high-power devices and coils with a resistance of 0.05 Ohm. That is why small-sized stealth devices are becoming more and more in demand, designed for a tight cigarette puff, but at the same time allowing you to get good flavor and a little vapor. Aspire (by the way, it hasn’t presented its new interesting devices for a long time) decided to present its vision of a stealth device, which has a similar name – K1 Stealth Kit. Some vapers may find this device a little strange, but true connoisseurs of tight cigarette puffs and compact devices will appreciate the K1 Stealth Kit. You can immediately say that the device is ambiguous, but interesting.
General information
The Aspire K1 Stealth Kit is a starter kit consisting of a high capacity battery and a specially designed atomizer that can be supplied in a standard or TPD version. The battery pack in this device is not just a battery, but a device equipped with a power switch, which will allow the vaper to choose the optimal mode of operation, quantity and temperature of steam. online vaping shop in australia The atomizer is a bit like an ego climber, but it is possible to use coils of various resistances and adjust the airflow. The device is presented in only two colors black and steel, but those who decide to buy it will not be embarrassed by this fact.
Equipment
It is difficult to say unequivocally what class this device belongs to, most likely, to AIO, but the manufacturer was not greedy regarding the configuration, the vaper will find everything he needs for the device to work smoothly. Therefore, in a simple box, the vaper will find:
Battery box K1 Stealth mod;
K1 plus tank atomizer with pre-installed 1.8ohm coil;
Spare evaporator with a resistance of 1.6 ohms;
Connector adapter;
USB cable for charging;
User’s Manual;
Warranty card.
Battery box K1 Stealth mod
The developers of Aspire have worked hard to create the K1 Stealth device, despite its apparent simplicity, it looks not just decent, but really strict. Naturally, there are skeptics who will say that the mouthpiece sticking out from the side spoils the appearance a little, but taking into account the structural and functional features, it is quite logical.
If we consider only the K1 Stealth battery pack, then it is a rectangular device with sharp corners and edges. According to some reviewers, the device is too prim and strict, but this is the trick.
K1 Stealth has a built-in 1000 mAh battery, which is more than enough for two to three days of battery life, since the maximum power of the device is 12 watts. The battery is charged in the traditional way using the micro-USB connector located on the side panel below the small fire button.
The power of the device can be changed depending on the installed evaporators or at the request of the vaper. To do this, there is a button on the bottom end that allows you to use the device at a power of 8/10/12 watts. Which of the modes is active is signaled by the corresponding LED, located all at the same end. At the same time, the device is equipped with a full set of protections, so in terms of operation it is completely safe.
Atomizer K1 plus tank
The K1 plus tank atomizer causes rather strange impressions. On the one hand, you understand that this is a good original MTL tank, designed to work with evaporators of various resistances. On the other hand, a return in 2013-15 to his Evod-type cabinets and related clearomizers. In any case, the decision to use just such an atomizer is quite interesting and, to some extent, non-standard.
Especially for the atomizer in the battery pack has a compartment, at the bottom of which there is a connector. But in order to install the tank, it is necessary to screw a special complete ring onto it, after which it simply sits on the protruding connector of the battery pack.
The K1 plus tank atomizer is presented in two versions, standard and TPD, which differ in two moments of volume (2.4 and 1.9 ml, respectively) and the installation process of a new evaporator (in the TPD version, you must turn the atomizer over before spinning). Filling is very simple; the top cap is unscrewed, which opens access to a small filling hole.
It is worth noting that regardless of the version, in the atomizer, you can adjust the tightening using the adjusting ring at the base of the tank. Air intake is carried out using four small holes, blocking which you can set the best tightening option for yourself.
Aspire offers two types of 1.6 and 1.8 ohm nichrome coils. As it becomes clear, vaporizers are designed for a cigarette puff, but at the same time they are able to give quite a decent taste transfer.
Conclusions and impressions
Despite the fact that some vapers will not understand what the Aspire K1 Stealth Kit is all about, this is a very interesting starter kit that lovers of tight cigarette puffs will definitely appreciate. The kit is very simple to maintain, looks strict, takes up little space, and at the same time, its autonomy is at the level that most vapers need.
Advantages and disadvantages
Disadvantages
Inconvenient replacement of evaporators;
Too protruding drip-type;
Small selection of evaporators.
Advantages
Original strict design;
Possibility of using three operating modes;
Large battery capacity;
Tight cigarette puff;
Decent flavor.
