Vape device manufacturers over the past several years have focused their attention on the release of POD systems and sub-mods. But this does not mean that they have completely forgotten about the fans of traditional tanks and tight cigarette puffs. For sure many vapers not only heard but also used successfully the creation of not unknown Alex from VapersMD tank Berserker which not only already saw several variants of performance, but also is considered as one of the most popular because of its affordable price and good flavor transfer. Quite a long time there were no new products from Alex (either he was resting on his laurels or was busy working on intricate designs), but still he presented Vandy Vape B3 (Berserker V3) MTL RTA.
General Data
Vandy Vape B3 (Berserker V3) MTL RTA is a medium size atomizer, designed for installation of one coil, designed for a tight cigarette puff, adjustable through interchangeable jitters acting as a pin. The design of the new tank at the same time strict and somewhat provocative, it is made in metal, so it looks very dignified and beautiful. An important feature of the device is that its volume can be significantly increased from 2 to 6 ml by additional glass and shaft extender. Shoe bottom, adjustable by replacing jigglers, which are also the plus pin. You can buy Vandy Vape B3 (Berserker V3) MTL RTA in five colors matte black, steel, gun metal, gray and gold.
Kit
To the kit devices from the company Vandy Vape was never a complaint, on the contrary, the devices of this Chinese manufacturer were and are exemplary for many in terms of what is in the box. And in the box the vaper will be able to find:
Atomizer B3 (Berserker V3) MTL RTA;
Two pre-wound Superfine MTL Fused Clapton Coil 0.74 ohms;
Mine Extender;
Two 510’s drip tips;
Three flasks;
Four jets (one pre-installed);
Hex wrench;
Replacement screws;
Replacement fingerings;
Warranty card;
User’s Manual.
Appearance and design
Vapers have the attitude towards the creations of Alex from VapersMD tanks and drips, but the fact that almost every fan of MTL-puffing has heard and tried them is a fact. In any case it is necessary to give Alex his due; he managed to develop the whole series of atomizers for tight cigarette draw which became exemplary for many vapers. The appearance of Vandy Vape B3 (Berserker V3) MTL RTA was expected, since the development of a new BersAlex spoke for quite some time, but it was now the tank was officially presented to the vaping world.
History holds back who exactly developed the design of the third Bers specialists Vandy Vape or personally Alex himself, but the device turned out quite nice, without flashy decor and in a concise, a little austere style. Among the decorations you can highlight only the logo with the letter V on the dome and the notch at the top and bottom of the tank, but they are not so much for decoration as for the convenience of using the device. The tank’s seat diameter is 24 mm, so it will logically look on most box mods.
The volume of the Vandy Vape B3 (Berserker V3) MTL RTA deserves special attention. By default, it is 2 ml, and the glass that creates the reservoir is quite shallow. But if you want, you can use a second glass or colored plastic to increase the volume to 6 ml (if you believe the Internet, even almost 7). Naturally, the kit also includes a shaft extension, used when you increase the volume. The kit comes with 4 flasks at once, two of gold-plated plastic and two of standard clear glass.
It is quite expected that the manufacturer has completed the new tank and original drip tip (one of Vandy Vape’s chips) with 510 seat. The vaper can choose both two variants of the usual dellrin peg and the enlarged compound drip-tip.
Base, blowdown and features of use
If you carefully study the evolution of Berserker, you can clearly see how the deck has changed in this tank in the third version it represents two racks, offset from the center, designed (of course) for one spiral. Problems with installation of the coil do not arise 100% because the coil is placed horizontally, and fixed at the top with two Allen screws, and the extra length of the legs can be bitten off without much difficulty.
The wool packing also will not cause any questions, as there are enough deep wells for it. The main thing when laying is not to push it into the wells, otherwise you can cause its starvation.
The most interesting thing about the Vandy Vape B3 (Berserker V3) MTL RTA is the blowing system. The blowing port is located directly under the coil. There is no traditional blowing control with the ring at the base of the tank. Instead of it the developer provided interchangeable jets with different outlet diameter 0,8/1,2/1,4/2,0 mm. But that is not all the replacement jets are a plus pin which is inserted into the tank from below and the jets are held in the tank with the help of nozzles, so the process of their replacement takes only a minute.
B3 (Berserker V3) filling is traditional, you remove the top cap, held by a bayonet mount, then you can pour 2 or 6 ml of liquid into the tank depending on the flask installed.
Conclusions and impressions
Vandy Vape B3 (Berserker V3) MTL RTA is another positive result of cooperation between Vandy Vape and Alex from VapersMD, who repeatedly proved to vapers that he is not only a famous reviewer, but also a good engineer and designer. The tank turned out pretty interesting, although in some points controversial, but still able to please all fans of tight cigarette puffs.
Advantages and disadvantages
Disadvantages
It is hard to say how strong the nozzles are if you change them all the time;
Wide variation in the diameter of the holes in the jets;
Lack of traditional blowing ring.
Advantages
Strict stylish design;
The seat diameter is 24mm;
Excellent Kit;
510″ drip tip;
Convenient base;
Easy installation of spirals and wadding;
Interchangeable jitters;
Easy jets replacement;
Large tank volume;
Practical refilling.
