In the view of the townsfolk, a vaper is a person who walks down the street and blows huge clouds of steam. But not all vapers do just that. The number of vapers who prefer small compact devices, tight cigarette puffs and small vapor clouds (they are much less than when smoking regular cigarettes) is not as small as one might think. It is for such vapers that manufacturers with enviable regularity release small starter kits designed for tight cigarette puffs and strong liquids based on organic/salt nicotine. Aspire has not released a compact kit for a long time, but the release of the K Lite Kit will improve the situation somewhat. This starter kit is interesting in that the vaper will receive a small, productive, autonomous device with an atomizer for a tight cigarette puff, which is easy to use and maintain.
General information
Aspire K Lite Kit is a compact starter kit consisting of a simple box mod with a built-in battery and the ability to control the output voltage, and an atomizer on the coils for tight puffing. Box mods of this format have been produced by other manufacturers more than once, but in any case, the device turned out to be compact and ergonomic. The ability to set the operating voltage will allow the vaper to choose the best option for vaping and the amount of vapor. vape devices in australia The K Lite atomizer is designed for the installation of replaceable evaporators for vaping organic and salt nicotine e-liquids. At the same time, the tank is designed for a tight cigarette puff with a standard adjustment. The Aspire K Lite Kit is available in five colors – grey, blue, green, orange and black.
Equipment
Aspire K Lite Kit is a fairly standard starter kit, but at the same time, the manufacturer made sure that it was equipped quite decently. In a black, rather nondescript box, the vaper will find:
Box mod K Lite mod;
Atomizer K Lite tank;
Aspire K Lite Coil Series 1.8ohm Nichrome Coil (pre-installed)
Aspire K Lite Coil Series 1.6 ohm nichrome coil;
USB cable for charging;
Warranty card;
User’s Manual.
Box mod K Lite mod
The form factor in which the K Lite mod is made has not been a novelty for a long time, but this does not negatively affect either performance, usability or ergonomics. The device is really compact, so it can be safely attributed to stealth devices that are in high demand among vapers.
Despite the fact that the K Lite mod box mod is equipped with a traditional 510 connector, it is not so easy to install another atomizer on it, except for the complete one, since its connector platform is designed for tanks with a diameter of 16 mm.
The device is powered by a built-in 900 mAh battery, which, taking into account high-resistance evaporators, will allow you to get serious autonomy. The device is charged using a traditional micro-USB connector located on the bottom.
An important feature of this device is that in addition to the traditional Fire button located at the top of the device, there is a button for adjusting the output voltage. For ease of use, there are also indicators showing what voltage is currently being supplied to the evaporator. The vaper can set the voltage in the range from 3 to 5 Volts in 0.5V increments. Such a solution will allow the vaper to choose the optimal mode of operation, the temperature of the vapor and its saturation, depending on personal preferences.
Atomizer K Lite tank
The K Lite tank atomizer is a traditional non-maintenance designed for a cigarette puff. The tank, of course, is small, 16 mm in diameter, but this does not make it defective, since it is not only designed for a tight cigarette puff, but also equipped with a 2 ml reservoir, and for such a small atomizer this is a good indicator.
The K Lite tank uses Aspire K Lite Coil Series evaporators with a resistance of 1.6 ohms (6-11 watts) and 1.8 ohms (9-13 watts), which are made on nichrome spirals. These vaporizers can be used for both organic and salt nicotine e-liquids. It is worth saying that the tank is compatible with Aspire BVC “amp; Spryte Coils, thanks to which the vaper’s choice expands significantly.
The installation of evaporators is as simple as possible; just unscrew the upper part with glass, unscrew the evaporator, screw in a new one and screw in the main body of the tank.
If we talk about airflow, then it is implemented by eight holes of small diameter, which are blocked by an adjusting ring, allowing you to get a full-fledged MTL tightening.
Refilling the K Lite tank will also not cause any problems. The top cover is unscrewed, giving access to a fairly large hole. If a version with child protection is purchased, then the hole is also equipped with a membrane that prevents liquid from escaping when the lid is open.
Conclusions and impressions
The developers of Aspire did a great job in designing and implementing the K Lite Kit, as they managed to get a compact device designed for tight tightening. Many vapers will appreciate the small size, versatility in terms of vaporizers, the ability to adjust the operating voltage and good autonomy.
Advantages and disadvantages
Disadvantages
Weak charging current;
It is difficult to get a very tight puff.
Advantages
Compact dimensions;
Capacious battery;
Five voltage modes;
Operating voltage indication;
510th drip-type;
Large tank capacity for a small atomizer;
Large selection of evaporators;
Ease of maintenance and use;
Variability of blowing;
Good taste transfer.
