Not so long ago, the appearance of POD systems was perceived by many vapers with a bayonet – how can you refuse your favorite fur with a drip that really knocks down in favor of a thermometer, from which you can’t even get a normal cloud. But a little time has passed, and more and more often you can meet vapers using POD systems, which have been successfully replaced by AIO format systems. Aspire has repeatedly pleased vapers with its products in this direction, but this does not mean that it has stopped, and an example of this is the new Mulus POD kit device. It’s hard to say right away if it’s an AIO system, a POD or a slightly strange box mod, most likely it combines all classes. Aspire Mulus POD kit is a fairly versatile device in which you can control power, airflow and change the battery yourself, isn’t this what every vaper dreams of
General information
The Aspire Mulus POD kit is an AIO system that uses a standard 18650 battery, equipped with a functional board and powered by two series of replaceable coils. The design of this pod-box is not something surprising or non-standard, as this format has been used many times by other manufacturers, but at the same time it is ergonomic and comfortable to use. The ability to replace the battery at any time will please any vaper, and the presence of a chipset will allow you to adjust the power and use one of three operating modes. e-cigarettes online boutique in australia An important plus is that you can install evaporators of two series Nautilus and Tigon, and there is an airflow adjustment using a special adapter. You can buy Aspire Mulus POD kit in four versions – Shale Black, Lava Flow, Psychedelic Blue, Deep Valley.
Equipment
It is worth giving it to the manufacturer, who made sure that the new device was equipped with dignity. Therefore, in the box, the vaper will find:
Mulus Mod Battery Pack;
Removable cartridge;
Adapter for evaporators;
Four coils – Tigon Coil4″Omega;, Tigon Coil 1.2″Omega;, Nautilus BVC Coil 1.8″Omega;, Nautilus 2S Mesh Coil 0.7″Omega; (preinstalled);
USB Type-C cable for charging;
Warranty card;
User’s Manual.
Mulus Mod Battery Pack
It should be said right away that the Aspire Mulus POD kit can hardly be called a POD system in the classical sense of such systems, the device is more like a compact box mod with a built-in atomizer. But in any case, the vaper will receive an interesting device, which is made in a fairly traditional design and has interesting functionality.
The form factor in which the Aspire Mulus POD kit is made will seem quite familiar to many vapers – a rectangular box with a small drip-type. The box is relatively small, no larger than a pack of cigarettes, so it fits perfectly in your pocket. The device is made of aluminum alloy with resin side panels, so it looks very dignified and original. It should be noted separately that the drip-type in this model is the classic 510th, so it will not be difficult to replace it with any other.
The Aspire Mulus POD kit is powered by a traditional 18650 battery, which cannot but please vapers, as you can change the battery in just a couple of seconds at any time. The battery is installed under the side panel, held with magnets.
If desired, you can charge the battery using the USB Type-C connector located on the side panel with a current of 2A.
An important feature of this device is that it is equipped with a board that allows you to get power up to 80 watts. At the same time, the vaper has three modes of operation: varivolts, varivolts and bypass, and this is a rarity for devices of this class. You can control the operating mode and basic parameters using a small monochrome display, for which there is a window in the side panel. Management is carried out using two buttons hidden under the same panel.
Mulus Pod Cartridge
The developers of Aspire made a rather wise decision to equip the Mulus POD with a rather interesting and practical removable cartridge. The fact that the capacity of its reservoir is 4.2 ml deserves special attention, and this is very good, since autonomy is guaranteed.
The manufacturer provides for the use of two series of evaporators of its own production Tigon and Nautilus, and when using Nautilus evaporators, it is necessary to install a special adapter (it is included in the kit), thanks to which you can adjust the airflow. At the moment there are four variants of evaporators Tigon Coil 0.4″Omega ;, Tigon Coil 1.2″Omega ;, Nautilus BVC Coil 1.8″Omega ;, Nautilus 2S Mesh Coil 0.7″Omega ;, but expansion of the line is possible.
Aspire Mulus POD kit has a very convenient filling system, in order to fill the liquid, you need to remove the side panel, open the silicone stopper and simply pour 4.2 ml of liquid.
Conclusions and impressions
It is difficult to say that the Aspire Mulus POD kit is an innovative product, since models of the same kind have already been presented by other manufacturers. But at the same time, the vaper will receive a fairly versatile device that has many useful functions and options, and for most vapers this is the main point when choosing AIO format systems.
Advantages and disadvantages
Disadvantages
Small play on the side panel;
Removing the battery is not very convenient.
Advantages
Compact dimensions;
original colors;
Use of 18650 battery;
fast charging;
Three operating modes;
510th drip-type;
Simple control;
Two series of evaporators;
Airflow adjustment.
