19 September 2024
Review of Smok SCAR-P3 Pod Kit

Review of Smok SCAR-P3 Pod Kit

Vapers who started vaping about five years ago, watching the modern development of vaping, are both horrified and happy. They are horrified by development trends and the sudden return of vaping, and they are happy that vaping is developing. One of the current trends is sub-mods, which have now successfully replaced the POD-systems and compact sub-mods. Company Smok not once delighted vapers device of this format, but this does not stop them, so they decided to continue the lineup of this format, presented a new pod-mod Smok SCAR-P3 Pod Kit. On the one hand it is quite a standard pod-mod, which, frankly, very much like the RPM series from the same Smok, but on the other hand it is made in the original design and has quite a decent functionality. We should say that Smok SCAR-P3 Pod Kit is one of the devices of SCAR line, which has already been presented by the manufacturer.

The general information

Smok SCAR-P3 Pod Kit compact submod with built-in powerful battery, running on productive chipset IQ-80 chip and designed to install a series of vaporizers RPM. The device is made in a fairly original design using metal and plastic, but the body is protected from dust, moisture and shock. The functionality of the device is quite simple, but for most users Varivatt mode will be quite enough. A big plus is that the vaporizers installed in the device are RPM series, so it is easy to pick them or RBA-base. Buy Smok SCAR-P3 Pod Kit is available in eight colors of rainbow, black and gray, blue, red, green stubwood, red stubwood, black and gold.

Complete set

If a vaper has ever come across devices from the company Smok, then the packaging of the new device is unlikely to surprise them all standard, banal and simple. The stylish black box the vaper will find:

Battery pack Scar-P3 device;

A Scar-P3 RPM 2 pod cartridge with pre-installed RPM 2 mesh16ohm vaporizer;

Scar-P3 RPM pod cartridge with pre-installed RPM mesh4ohm;

USB Type-C cable for charging;

User’s Manual.

Scar-P3 battery pack device

A little surprising and alarming activity of the company Smok, which is literally the last couple of months has presented a lot of interesting and worthy devices. The conclusion begs only one marketers company decided to tightly conquer the main areas of the market, seriously moving the competition. And the new submod Smok SCAR-P3 Pod Kit is another confirmation, as it is very similar to his mentor, RPM 80.

Visually Smok SCAR-P3 Pod Kit looks both decent and standard devises such form factor was already presented a lot, but at the same time in the design uses good ergonomics. The device uses not only the traditional zinc alloy, but also quite bright plastic inserts, styled as stabwood, resin and leather. An important feature of the device is that it has a protection class IP67 protected against water, dust and has some protection against shock.

Maximum power Smok SCAR-P3 Pod Kit 80 watts is provided by a built-in battery capacity of 2000 mAh, which is not too bad for such a device. The battery is charged with a current of 1.1A through a USB Type-C connector, located on the bottom end of the device and closed from the water silicone cap.

Smok SCAR-P3 Pod Kit runs familiar to many vapers chipset IQ-80 chip, through which the vaper will be able to use the device in mode varivatta power of 5-80 watts. Of course, there is also a color display, through which the vaper will be able to monitor the main parameters of the device.

Scar-P3 cartridge

Quite interesting is the fact that the manufacturer offers vapers two options of cartridges for Scar-P3 – RPM 2 pod and RPM pod, which are very similar, but have certain design differences regarding the installed cartridges. Both cartridges are held in the battery pack by magnets.

If with the cartridge Scar-P3 RPM pod everything is clear, it is designed to use the vaporizers of RPM series (including serviced base), the Scar-P3 RPM 2 pod is more interesting. Especially for this cartridge was designed a new vaporizer RPM 2 mesh 0.16ohm on the grid, so there will be no problems with the taste. Regulation of blowing is not provided.

Both cartridges are refilled by the same principle on the top end has a silicone plug, opening which you can pour 5.5 ml of liquid, which is not too bad.

Conclusions and impressions

We can not say that Smok SCAR-P3 Pod Kit is able to surprise especially the experienced vaper, because in fact it is a modified version of the RPM 80, but with some changes and improvements. At the same time the vaper will get a reliable, easy to use device, for which it is not difficult to pick up vaporizers.

Advantages and disadvantages

Disadvantages

Weak charging current;

Lack of adjustment of the air blowing.

Advantages

The original design;

Great choice of colors;

Powerful battery;

USB Type-C;

Reliable chipset;

Great power;

Easy control;

Large selection of vaporizers and RBA base;

Decent capacity cartridge;

Convenient refilling;

Good flavor and bulk.